Sprung wooden bed slats are ideal for bed repair and slat replacement made with quality beech wood
thickness (height) 0.8 cm and width 5,3 cm in different lengths of beech wood
The Sprung wooden bed slats are ideal for repairs if one or more Sprung wooden bed slats are broken or no longer have their usual strength. Over time, featherholes lose their strength or break even. As a result, sleep comfort is greatly reduced. For this reason, spring-back chucks should be replaced after 5 years.
THE SOLUTION:
Instead of buying a new slatted frame, you can easily exchange the springwood slats and sleep again as if the slatted frame were new
Easy installation. Can also be used as additional reinforcement
So you save a lot of money, spare the environment and do not need to buy a new slatted frame.
If you are interested in our shop, you will also find completely new slats.
Sprung wooden bed slats
Slightly curved multi-layer beech-spring-felt
Made of quality plywood (beech) from sustainable cultivation
Milled rounded soft edge to prevent damage to the mattress
Natural color
Have a thickness (height) of 0.8 cm
And width of 5,3 cm
In different lengths: 58,0 cm 68,0 cm,78,0cm,88,0cm und 98,0cm
FAIR & ORDER:
Before you order your matching springwood cutlery, it is important that you carefully and accurately measure one of your old springwood knives (without bow). Thus, the new spring-loaded chisels can be used in your old slatted frame. Please note the cap width of 0.8 cm!
If other numbers are required - simply write a short message!
-
Questions about the purchase
-
How does customs clearance work and how do I get the VAT back?Â
- The customs clearance is carried out by the forwarding company. You will receive a separate invoice from the special department for customs and VAT. Then simply send us the customs document or the stamped invoice and we will refund you the VAT.
-
When is an express delivery possible?
- You have the option to select express delivery as soon as it is displayed in the respective article. Note that you may need to select a combination for certain items (without a mattress, etc.) and express delivery may not be possible for every combination.
-
What are the differences between the Standard and Basic models?
- The basic model has a short handle and extendable feet. The Standard model has one or two long handles (vertical / horizontal) and folding feet. The exact differences between the Basic and Standard models can be found at https://smartbett.de/Basic-vs-Standard_1.
-
How does customs clearance work and how do I get the VAT back?Â
-
Questions about the assembly
-
Do you offer the assembly of the furniture?
- At the moment we do not offer the assembly of our furniture or of our SMARTBett.
-
How do I adjust the front, if it gets out of the corpus or the gap dimension is not correct?
- The adjustment of the front takes place in the mechanisms. If you want to have the front up or down, you have to move the 3 screws of the "arms" of the mechanism. If the front is too far out or too deep in the corpus, you can set it on the mechanism-fixture in the corpus.
-
Why do I need a ceiling height of minimum 235cm for the construction of a vertical Murphy bed with 221cm height.
- The bed is set up in a horizontal position and it needs during the raise up due to the angle a higher ceiling. Building it up in a vertical position is somewhat more difficult. The safety-screws are to be found on the top board of the bed and you need some space to tighten them.
-
Do you offer the assembly of the furniture?
-
Questions about the construction of the SMARTBett
-
Can I use the stronger gas springs for a mattress with a weight less than 25kg?
- We do not recommend this because there is a possibility that the front can not be completely folded down. This can cause damage to the Murphy bed.
-
Do you sell single or pairs of mechanisms or safety belts?
- If you bought a Murpy bed from us, you have the possibilty of a complaint. If the bed is outside the warrenty period, we can replace the defect parts chargeable. We do not sell single parts.
-
Can you put two single mattresses on a bed 120/140/160cm instead of one?
- Yes, it causes no problems.
-
Can I see the SMARTBett somewhere live?
- You have the possibility to visit us in our showroom in Lehrte / Sievershausen near Hannover and to see the beds.
-
Do you also offer larger beds than 160x200 or is there the possibility to get a customized bed.
- Besides the size 90x200, 120x200, 140x200 and 160x200 we have no other sizes. There is unfortunately no possibility of a special design or customized.
-
How will the bedclothes be kept in the Murphy bed.
- You can use the click lock to strap the bedclothes on the mattrass and then simply close the bed.
-
Are there different colours of the different sizes of the beds?
- Sorry, we do not customize thte beds in other colours. All colours can be found here on our website.
-
Do you sell the Murphy bed with an electric opening?
- We do not sell this yet.
-
Can I use the Murphy bed as a daily bed?
- Yes, it causes no problems.
-
Can I use the stronger gas springs for a mattress with a weight less than 25kg?
-
Questions about complaints
-
How do I complain missing parts?
- For missing parts, please send us an email with your order and customer number. Tell us the missing parts with the part name in the instruction and the missing amount.
-
How do I complain damaged parts?
- For damaged parts, please send us an email with your order and customer number. Tell us the damaged parts with the part name in the instructions and the amount. IMPORTANT! For a complaint of damaged parts we need pictures of the parts.
-
How long does it take to receive my complained parts?
- We can usually send small parts in a few days. However, there are parts that we do not always have in stock and must be ordered from our producers. Then it maybe takes about 2-4 weeks. We always try to find the best solution.
-
How do I complain missing parts?